Go Rhino 915000T Sports Bar 2.0 | 2015-2024 Chevrolet Colorado, 2015-2024 GMC Canyon, 2016-2023 Toyota Tacoma

I will admit, I bought it knowing my current trifold Odero cover 2nd fold hinge will be inside the track of the bar so I will only be able to fold the 1st hinge for small loads or unlatch it and remove when I have to. The Odero cover is a perfect fit from bulkhead to tailgate. This is on a 2021 GMC Canyon Elevation crew cab (5 foot short bed). Here's where the grinder had to come out. The top mount DOES have a small cut out for the rear brake light but for full rain protection at the bulkhead you HAVE to hug the rear window. If you have a long cover you dont want a giant overhang at the tailgate you need to fabricate. The width of the top rail cut out WILL NOT clear your rear wide bubble brake light. Not sure if Colorado/Canyon went with a much larger light in 2021 but it hit it HARD and A LOT. GO Rhino needs to reposition the support braces at bulkhead side UP and widen the gap for these to fit. I had the means to do so and after spraying the exposed steel with more under coat matte finish spray and wrestling it for 7 HOURS I got it to fit with the cover I HAVE. After all that...I LOOOOVE the tough look of this sport bar. It gives it that tough as a tank look. Mean as h×ll. It makes a midsize truck turn into BEAST MODE. I'm extremely happy with the product. I'm not happy with the rear light spacing clearance for a cover (any cover) meeting the seal contact of the bulkhead. I have to install a rubber stick on strip to close the finger thick gap to keep rain out at the bulkhead.

Like it, makes my truck unique from any other trucks in my area. Don't care what others or haters may say if you love it just go with it. Knock of one star because oh my the installation and assembly is a real pain plus the guides including the videos don't tell step by step how to install this sports bar. At one point I could have given up and just return this but I'm very determined. The mounting to the bed needs to be re-design. You have to perfectly allign nuts and bolts given that my bed rails are irregular in shape is kind of impossible to do so. Secondly assembling the sports bar you have to lubricate bolts and threads and if not you may end up stripping it like I strip 1 of mine. I install this myself it would have been much easier if you have a second set of hands. But over all it's good and made in US of A.

Looks great! I love it... read the other reviews and was thinking about not buying it. But I wanted to put my cover on the bed. So I got it. Had no problem like others wrote about. As I learned growing up. You never tighten the bolts up till you get them all started. I did have to cut the bottom bed plate so my cover fit better. But other then that it was great and I just love it. Its not a 5 minute job. But the ending results will make you smile. Hope this review helps you.

Installed on my 2018 Tacoma. Install went pretty smoothly. Warning! As another stated. Before drilling into your bed rails (with bed covers) make sure you don’t drill into a open slot etc. I have a roll-n-lock cover. I did notch the bars lower mounting brackets to fit around my rollnlock canister rather then running over the brackets causing a gap. A bit pricey but looks nice.

Fits my 2005 GMC Canyon 4x4 crew cab. Little bit of modification, but fits and looks amazing

I will admit, I bought it knowing my current trifold Odero cover 2nd fold hinge will be inside the track of the bar so I will only be able to fold the 1st hinge for small loads or unlatch it and remove when I have to. The Odero cover is a perfect fit from bulkhead to tailgate. This is on a 2021 GMC Canyon Elevation crew cab (5 foot short bed). Here's where the grinder had to come out. The top mount DOES have a small cut out for the rear brake light but for full rain protection at the bulkhead you HAVE to hug the rear window. If you have a long cover you dont want a giant overhang at the tailgate you need to fabricate. The width of the top rail cut out WILL NOT clear your rear wide bubble brake light. Not sure if Colorado/Canyon went with a much larger light in 2021 but it hit it HARD and A LOT. GO Rhino needs to reposition the support braces at bulkhead side UP and widen the gap for these to fit. I had the means to do so and after spraying the exposed steel with more under coat matte finish spray and wrestling it for 7 HOURS I got it to fit with the cover I HAVE. After all that...I LOOOOVE the tough look of this sport bar. It gives it that tough as a tank look. Mean as h×ll. It makes a midsize truck turn into BEAST MODE. I'm extremely happy with the product. I'm not happy with the rear light spacing clearance for a cover (any cover) meeting the seal contact of the bulkhead. I have to install a rubber stick on strip to close the finger thick gap to keep rain out at the bulkhead.

Like it, makes my truck unique from any other trucks in my area. Don't care what others or haters may say if you love it just go with it. Knock of one star because oh my the installation and assembly is a real pain plus the guides including the videos don't tell step by step how to install this sports bar. At one point I could have given up and just return this but I'm very determined. The mounting to the bed needs to be re-design. You have to perfectly allign nuts and bolts given that my bed rails are irregular in shape is kind of impossible to do so. Secondly assembling the sports bar you have to lubricate bolts and threads and if not you may end up stripping it like I strip 1 of mine. I install this myself it would have been much easier if you have a second set of hands. But over all it's good and made in US of A.

Looks great! I love it... read the other reviews and was thinking about not buying it. But I wanted to put my cover on the bed. So I got it. Had no problem like others wrote about. As I learned growing up. You never tighten the bolts up till you get them all started. I did have to cut the bottom bed plate so my cover fit better. But other then that it was great and I just love it. Its not a 5 minute job. But the ending results will make you smile. Hope this review helps you.

Installed on my 2018 Tacoma. Install went pretty smoothly. Warning! As another stated. Before drilling into your bed rails (with bed covers) make sure you don’t drill into a open slot etc. I have a roll-n-lock cover. I did notch the bars lower mounting brackets to fit around my rollnlock canister rather then running over the brackets causing a gap. A bit pricey but looks nice.

Fits my 2005 GMC Canyon 4x4 crew cab. Little bit of modification, but fits and looks amazing