Hellwig 550 EZ Level Helper Spring Kit

2003 Toyota 2.7 prerunner with 3” lift.
Excellent results, Spring kit really helped with axle wrap. Highly recommend! Here's my take,

Pros
Easy install, one 11/16 wrench.
Ride is better, got rid of the “thud” at stops and start.
Extra benefit for towing and hauling.
Very ridged and high quality.

Cons

It’s a known fact and bit frustrating when installing springs on certain models. On my model you can see in my pics, the rear U-bolt lands right over the tailpipe. I’ve read on some Toyota forums hellwig makes angled U- bolts for certain applications. For $65 you’d think they could throw a couple in for mounting options. I was able to make it work by cutting a 1/2” off one side of you bolt above tailpipe. So far I’ve had no problems.
Spring kit is worth it, but minus 1 star for no angled U-bolts. Install took 1 hour. Check pics, leaf springs are not sagging. I also torqued rear U-bolt down to the calm on rear leaf, seems to be the sweet spot.

The description when ordering, says this won't fit my 1998 Dodge Grand Caravan, however, it fits! I had to add spacers to the bottom of the U-Bolts, I used (oversized Nuts) so that the assembly would be totally tight with the spring. (SEE PHOTOS) The leaf spring on my Dodge Caravan are a single leaf where these helpers attach, so spacers are needed for U-Bolts, to totally tighten snug. This fits fine, I could tell a difference right away with the height, as the springs were almost bent backward. I added these to the back of the leaf springs, and it worked so well, I'm ordering another set to put on the front of the back leaf springs. Remember, as long as the springs are the close to the same size, they will fit, you may, however, need to add spacers as I did. Great Product, although the mfg needs to add spacers to the kit to fit snug to vehicles like mine.

Very easy to install just wish they had a better hardware.

Looks good, my boat tongue wait is over 800. I’m towing a jvc 17ft with a 40 hp center console

Worked great to the level the rear load while hauling firewood. Installed in 30 minutes (on a lift).

2003 Toyota 2.7 prerunner with 3” lift.
Excellent results, Spring kit really helped with axle wrap. Highly recommend! Here's my take,

Pros
Easy install, one 11/16 wrench.
Ride is better, got rid of the “thud” at stops and start.
Extra benefit for towing and hauling.
Very ridged and high quality.

Cons

It’s a known fact and bit frustrating when installing springs on certain models. On my model you can see in my pics, the rear U-bolt lands right over the tailpipe. I’ve read on some Toyota forums hellwig makes angled U- bolts for certain applications. For $65 you’d think they could throw a couple in for mounting options. I was able to make it work by cutting a 1/2” off one side of you bolt above tailpipe. So far I’ve had no problems.
Spring kit is worth it, but minus 1 star for no angled U-bolts. Install took 1 hour. Check pics, leaf springs are not sagging. I also torqued rear U-bolt down to the calm on rear leaf, seems to be the sweet spot.

The description when ordering, says this won't fit my 1998 Dodge Grand Caravan, however, it fits! I had to add spacers to the bottom of the U-Bolts, I used (oversized Nuts) so that the assembly would be totally tight with the spring. (SEE PHOTOS) The leaf spring on my Dodge Caravan are a single leaf where these helpers attach, so spacers are needed for U-Bolts, to totally tighten snug. This fits fine, I could tell a difference right away with the height, as the springs were almost bent backward. I added these to the back of the leaf springs, and it worked so well, I'm ordering another set to put on the front of the back leaf springs. Remember, as long as the springs are the close to the same size, they will fit, you may, however, need to add spacers as I did. Great Product, although the mfg needs to add spacers to the kit to fit snug to vehicles like mine.

Very easy to install just wish they had a better hardware.

Looks good, my boat tongue wait is over 800. I’m towing a jvc 17ft with a 40 hp center console

Worked great to the level the rear load while hauling firewood. Installed in 30 minutes (on a lift).